PDU IP
Key features:
- “Hot Swap” smart module: allows replacement of the module without interrupting power supply to the outlets.
- Maximum flexibility in outlet configuration.
- Customization available: management module, socket colors, frame colors and cable exit positioning.
Clever SUM PDUs can be upgraded from a basic PDU to a locally metered or fully remotemonitored PDU by replacing ONLY the smart module.
The SUM IP PDU allows progressive upgrading by adding different smart modules,
reaching Metered or Monitored performance levels.
| Silver SUM PDU Family | B-PDU | BM-PDU | IP-PDU |
|---|---|---|---|
| Maximum current up to 63A | ✓ | ✓ | ✓ |
| Voltage: 100~240V, 200~400V | ✓ | ✓ | ✓ |
| Multiple outlet configuration | ✓ | ✓ | ✓ |
| Surge protection – optional | ✓ | ✓ | ✓ |
| Circuit breaker – optional | ✓ | ✓ | ✓ |
| Three-phase 16A / 32A | ✓ | ✓ | ✓ |
| Locking safety outlets | ✓ | ✓ | ✓ |
| Tool-less mounting | ✓ | ✓ | ✓ |
| Hot-swappable local ammeter | ✓ | ✓ | |
| IP access | ✓ | ||
| SNMP management | ✓ | ||
| IP Environmental monitoring | ✓ |
- Simplified and highly intuitive software
- Communication protocols: SNMP / Telnet
- Alarm e-mail notifications
- Through an embedded web interface, IP-PDUs allow monitoring of:
- Current load
- Voltage
- Energy consumption
- Power
- Ability to monitor up to 5 PDUs using a single IP address via daisy-chain
- Monitoring via sensors for: Temperature and humidity (1 T/H sensor available on request)
- NET port: Ethernet access for remote monitoring
- SER port: Serial access, MODBUS protocol, daisy-chain connection (IN)
- LINK port: Daisy-chain connection (OUT)
Clever Italy